Power up the system:
1. Please plug in the power supply. LED indicators of the Transmitter and Receiver will turn ON.
2. Please turn ON the HDMI display devices then followed by the HDMI source device to be
turned ON. The built-in EDID priority management function will detect the supporting resolutions
of the connected display devices automatically as a sequence below:
HDMI Output1 → HDMI Output2 → HDMI Output3
HDMI Output1 always have first priority, if Output1 is not connected, Output2 will have priority.
When HDMI Outputs is plugged in or unplugged, EDID Hotplug refreshing function will take place.
If those display devices do not have EDID, please use EDID emulator between source and
Transmitter.
ET-H4T2100 / ET-H4R2100
Source
ET-H4T2100
Display
Local
5
ET-H4R2100