Related Manuals for Digitogo ET-HST1300
Summary of Contents for Digitogo ET-HST1300
- Page 1 HDMI 300m UTP Extender Series ET-HST1300 HDMI 300m UTP Extender Transmitter 1-port ET-HSR1300 HDMI 300m UTP Extender Receiver 1-port ET-HST4300 HDMI 300m UTP Extender Transmitter 4-port...
- Page 2 ET-HST/R1300 Set Transmitter Unit x 1 Receiver Unit x 1 Locking DC 5V 2A Power Adapter x 1 AC Power Cord x 2 Quick Installation Guide x 1 ET-HSR1300 Receiver Unit x 1 Locking DC 5V 2A Power Adapter x 1 AC Power Cord x 1 Quick Installation Guide x 1 ET-HST4300...
- Page 3 ET-HST1300 HDMI 300m UTP Extender Transmitter 1-port ET-HST4300 HDMI 300m UTP Extender Transmitter 4-port...
- Page 4 ET-HSR1300 HDMI 300m UTP Extender Receiver 1-port...
- Page 5 1. Attach HDMI cables from video source to Transmitter and from Receiver(s) to display(s). 2. Attach Ethernet cables connecting between Transmitter and Receiver(s). 3. Connect and power on Transmitter and Receiver(s). Do not switch on displays until resolution settings made. 4.
- Page 6 5. Define display resolution of the monitor attached directly to Transmitter. If local display not required at Transmitter, skip this step. If display do not show desirably, or specific resolution required, define setting as below- Select desired resolution from one of the option from table below.