Using The Touch Panel; Remote Control Functions - Sangean DDR-47BT User Manual

Using the touch panel

The DDR-47BT sound system has a stylish touch panel instead of
conventional buttons.
To operate the buttons simply touch the button area with the tip of
a finger for about half a second. The clock set and system menu
functions marked with a dot (●) are accessed by means of a long touch
(-3 seconds) on the appropriate button until the display on the sound
system shows that the command has been accepted.
You may find that at first, the sound system does not always detect
that you have touched a button. If so, try touching with a little more
pressure, or for slightly longer. You will soon find the optimum touch
needed to control your sound system. (See also the section of" Touch
Panel Sensitivity Control")
The panel may be cleaned using a dry cloth. Do not use abrasives,
cleaning fluids or solvents.

Remote control functions

Most of the functions of the DDR-47BT sound system can be controlled
using either the touch panel or the remote control.
However, there are a few functions which are only accessible using the
remote control. These are:
DAB / FM radio station presets
DAB menu function
CD / USB / SD CARD random
track control
As with the front panel, some operations require a longer operation
of the button (explained in the relevant sections). In this case simply
keep your finger held on the remote control button for 2-3 seconds until
the display on the sound system shows that the command has been
accepted.
DAB / FM auto-tune
CD / USB / SD CARD track access
by numbers
Audio mute
GB
7