Clock And Alarms; Setting The Clock Manually - Sangean DDR-47BT User Manual

Setting the clock manually

The DDR-47BT will automatically set its clock when tuned to a DAB radio station or to an FM
station which is broadcasting the time via RDS.
If the clock cannot be set using DAB or FM radio then you will need to set the clock manually
before the alarm function can be used. The clock may be set while the unit is in standby mode or
while playing. The clock display is always in 4 hour format.
If it becomes necessary to set the clock manually, please follow these steps:
1. Press and hold the Clock Set button. The hour digits on the display will flash.
. Press the Tuning Up or Down button to highlight the / 4 hour time format. Press the Select
button to confirm the setting.
3. Press the Tuning Up or Down buttons to change the hour digits as needed. Keep the button
pressed to cause the digits to change more quickly.
4. Press and release the Select button to confirm the hour setting. The minute digits on the
display will flash.
5. Press the Tuning Up or Down buttons to change the minute digits as needed. Keep the button
pressed to cause the digits to change more quickly.
2,3,5
2,3,5
2,4
GB
39