Alarms - Sangean DDR-47BT User Manual

Alarms

Your DDR-47BT sound system has two alarms which can each be set to wake you to DAB, FM
radio, CD, USB, SD card or buzzer alarm. The alarms may be set while the unit is in standby
mode or while playing.
. Before setting an alarm ensure that the clock time is set (see the section of 'Setting the clock
manually'). Press and release the Alarm button. "Alarm " will show on the display.
. Press the Tuning Up or Down buttons to select the required alarm,  or . Press and release
the Select button to cause "Alarm setting" to show on the display.
3. Press and release the Select button to choose alarm setting. "Alarm: On/Off" will show on the
upper line of the text display.
4. Press the Tuning Up or Down buttons to choose whether to set the alarm to On or Off.
5. Press and release the Select button. If the previous selection was to switch on the alarm, then
"Alarm: Time" will show on the upper line of the text display and the Alarm hour digits will flash.
If Off was selected, the unit will exit the alarm menu.
6. Press the Tuning Up or Down buttons to choose the alarm hour and then press and release
the Select button to enter the hour setting. The Alarm minute digits will then flash on the display.
7. Press the Tuning Up or Down buttons to choose the alarm minute and then press and release
the Select button to enter the minute setting. "Alarm: Mode" will show on the upper line of the
text display.
2,4,
2,4,
6,7
6,7
3,5,
6,7
GB
4