Zrx1200.1D / Zrx1800.1D / Zrx2400.1D / Zrx3200.1D 1-Channel Amplifier Applications - Hifonics Zeus ZRX500.2 User Manual

ZRX1200.1D / ZRX1800.1D / ZRX2400.1D / ZRX3200.1D 1-CHANNEL AMPLIFIER APPLICATIONS

Basic application
These sub bass amplifiers can be used in any of the bi-amplification systems described in
this manual, replacing the 2 channel amplifiers as per the illustrations.
Interconnect cable checklist:
Connect the inputs to a suitable source, e.g. a head unit with good quality RCA cables.
Connect the LINE OUT to the inputs of the system highs amplifier.
Use at least #12 gauge speaker wiring. The amps have dual speaker terminals,
simplifying the hookup of multiple speakers. These amps are mono, 1 channel, amplifiers
which have multiple positive and negative connections for ease of wiring. The 2 positives
are the same internally and the 2 negatives are the same internally.
DESIGNATED
MONO OUTPUT
FROM HEAD UNIT
B O O S T
H F R - 3 MI N MA X X
DESIGNATED
MONO OUTPUT
FROM HEAD UNIT
B O O S T
H F R - 3
MI N MA X X
Note: You can use the Radio/CD designated mono line output or a full range stereo line output.
For full range stereo line output, you will need an optional "Y-Adaptor" as shown.
ZRX1200.1D & ZRX1800.1D
ZEUS
ZRX2400.1D & ZRX3200.1D
ZEUS
FULL RANGE
STEREO LINE INPUT
NOT USED
Crossover frequency control checklist:
LOW PASS: 30Hz to 250Hz
SUBSONIC:15 Hz to 35 Hz
BASS EQ: 0 to +10dB
Level control checklist:
Refer to the section "Setting up systems after installation for best performance"
Minimum final loudspeaker impedance: 1-Ohm.
Y-ADAPTOR
MONO
SUBWOOFER
TO BATTERY + 12 Volts
VIA FUSE
REMOTE TURN-ON
CHASSIS GROUND
MONO
SUBWOOFER
REMOTE TURN-ON
CHASSIS GROUND
TO BATTERY + 12 Volts
VIA FUSE
6