Advertisement
Table of Contents
- 1 Table of Contents
- 2 General Installation Procedure
- 3 Amplifier Feature Descriptions
- 4 Zrx500.2 / Zrx1200.2 2-Channel Amplifier Applications
- 5 Full Range Stereo / Mono
- 6 Zrx600.4 / Zrx1000.4 / Zrx2000.4 4-Channel Amplifier Applications
- 7 Zrx1200.1D / Zrx1800.1D / Zrx2400.1D / Zrx3200.1D 1-Channel Amplifier Applications
- 8 Features and Specifications
- 9 Setting up Systems after Installation for Best Performance
- 10 Troubleshooting a System
- 11 Troubleshooting and Diagnostics
- 12 Product Warranty
- Download this manual
Advertisement
Table of Contents
Related Manuals for Hifonics Zeus ZRX500.2
Summary of Contents for Hifonics Zeus ZRX500.2
- Page 1 ZRX500.2 / ZRX1200.2 ZRX600.4 / ZRX1000.4 / ZRX2000.4 ZRX1200.1D / ZRX1800.1D / ZRX2400.1D / ZRX3200.1D...
-
Page 2: Table Of Contents
ZEUS HIGH PERFORMANCE AMPLIFIERS The Zeus ZRX Series products have been designed to a very high level of performance, with features unavailable in any other product. All of the amplifiers have variable crossovers built in, with added touches such as subsonic filter, bass equalization and a remote Level control module(some models) that allows subwoofer Level control from the drivers seat. -
Page 3: General Installation Procedure
GENERAL INSTALLATION PROCEDURE System Design The success of any car stereo system relies on several factors, such as the system design, execution of the installation, and system setup. Please remember that any system is only as good as its weakest link. Please remember that higher power systems are not necessarily useful purely for high sound pressure levels, but also to establish a headroom capability, to reproduce musical peaks cleanly without distortion. -
Page 4: Amplifier Feature Descriptions
Crossover filters are 12dB/Octave. A POWER LED indicates the powered up and turned on condition. All Hifonics amplifiers feature a comprehensive diagnostic system, with speaker lead short circuit, and amplifier DC faults indicated by the red “PROTECT” LED. ZRX500.2 / ZRX1200.2 2-CHANNEL AMPLIFIERS... -
Page 5: Zrx500.2 / Zrx1200.2 2-Channel Amplifier Applications
TO BATTERY +12v VIA FUSE REMOTE TURN-ON CHASSIS GROUND MONO This application illustrates the basic mono bridging method for all Hifonics Switch setting checklist: amplifiers. - The AMPLIFIER X-OVER switch should be in the LP/BP position. Interconnect cable checklist: Crossover frequency control setting checklist: A MONO signal source is required, such as would be available from the mono LPF: 11 o’clock... -
Page 6: Zrx600.4 / Zrx1000.4 / Zrx2000.4 4-Channel Amplifier Applications
2 or 3 CHANNEL SYSTEM Here we show how to use the 4 channel amplifiers as a 3 channel unit by taking Switch setting checklist: advantage of the mono bridging capability of all Hifonics amplifiers. - 1/2CH X-OVER: FULL - 3/4CH X-OVER: LPF The following example shows how to create a 3 channel system by mono bridging channel pair 3 / 4. - Page 7 ZRX600.4 / ZRX1000.4 / ZRX2000.4 4-CHANNEL AMPLIFIER APPLICATIONS Front/Rear high pass, using a 2 channel amplifier for mono sub bass The combination of a 2 and a 4 channel amplifier, utilizing their built in Channels 1/2: crossovers, makes it a snap to put together a full system with front and rear - HI PASS: 100 Hz highs, with mono sub bass.
-
Page 8: Zrx1200.1D / Zrx1800.1D / Zrx2400.1D / Zrx3200.1D 1-Channel Amplifier Applications
ZRX1200.1D / ZRX1800.1D / ZRX2400.1D / ZRX3200.1D 1-CHANNEL AMPLIFIER APPLICATIONS Basic application These sub bass amplifiers can be used in any of the bi-amplification systems described in Crossover frequency control checklist: this manual, replacing the 2 channel amplifiers as per the illustrations. LOW PASS: 30Hz to 250Hz SUBSONIC:15 Hz to 35 Hz Interconnect cable checklist:... -
Page 10: Setting Up Systems After Installation For Best Performance
SETTING UP SYSTEMS AFTER INSTALLATION FOR BEST PERFORMANCE ZRX500.2 / ZRX1200.2 / ZRX600.4 / ZRX1000.4 / ZRX2000.4 General: At this point you are ready to get more specific on the settings for your amplifier. High Pass: -When in Hi Pass operation, this setting acts as a low frequency cut off for your system reproduction. The point that you set it at cuts off any frequencies from reproduction beyond this point. -
Page 11: Troubleshooting And Diagnostics
The key to finding the problem in a misbehaving sound system is to isolate parts of that system in a logical fashion to track down the fault. Description of the PROTECT system built into all Hifonics amplifiers The diagnostic system will shut down the amplifier, until reset by turning the head unit off, and back on. This state of affairs will be indicated by the front panel PROTECT LED lighting up under the following conditions: 1 - A sort circuit on the loudspeaker leads. -
Page 12: Product Warranty
Maxxsonics Limited Warranty As the manufacturer of Maxxsonics, MB Quart, Autotek, Crunch and Hifonics car audio products, Maxxsonics USA Inc. Warrants to the original consumer purchaser the amplifier to be free from defects in material and workmanship for one (1) Year from date of purchase. - Page 13 Biggest POWER systems V3 Products, Level 10 Performance + 1 Year Warranty Moderate POWER systems V2 Products, Level 7 Performance + 6 Month Warranty Smaller POWER systems V1 Products, Level 5 Performance...
- Page 14 PART#: A113...