Table of Contents
Advertisement
Turning the Recorder On and Off
Recorder power is supplied from the vehicle's battery.
On
Turn the vehicle's ignition switch
to ON or ACC.
Power to the recorder is turned on.
Off
Turn the vehicle's ignition switch
to LOCK (OFF).
Power to the recorder is turned off.
Notes:
• The recorder cannot be turned off
from the Remote Control Panel
(separately sold).
• The "PowerOff Time" can be set
(page 31) to allow the recorder to
continue operating for up to 180
minutes after the vehicle's ignition
switch is turned to LOCK (OFF).
About the Internal Clock
Confirming the Time
The internal clock is set at the time of factory default. Check the time before
using, and reset the clock if necessary.
Note:
To use GPS, install the separately sold GPS module and connect the GPS
antenna (provided with the GPS module) to the [GPS-ANT.] connector on the
rear panel.
Contact your supplier for help with installation or connection.
During GPS reception, the signals received will regularly and automatically set
the recorder clock to GPS time.
Time Zone Setting
The factory default time zone setting is "Eastern Standard Daylight Saving Time".
When using in a different time zone, set the time zone for your region.
18
Advertisement
Table of Contents
