2.
USB connector (5-1 pin USB3; A-Type USB10)
These connectors are for USB 2.0 ports. Connect the USB module cables to
connectors USB3, then install the modules to a slot opening at the back of the system
chassis. These USB connectors comply with USB 2.0 specification that supports up to
480 Mbps connection speed.
3.
Front fan connectors (4-pin FRNT_FAN1-4)
The fan connectors support cooling fans of 350 mA–740 mA (8.88 W max.) or a total of
3.15 A–6.66 A (53.28 W max.) at +12V. Connect the fan cables to the fan connectors
on the motherboard, ensuring that the black wire of each cable matches the ground pin
of the connector.
•
DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow
inside the system may damage the motherboard components.
•
These are not jumpers! DO NOT place jumper caps on the fan connectors!
•
All fans feature the ASUS Smart Fan technology.
ASUS Z10PH-D16
2-29