Programmable settings
You can customise the unit by programming the following features using the handset.
To access the features, there are 2 methods.
n Scrolling through the display menus
1
(middle soft key)
2
Press MCN, MDN, MEN, or MFN to select the desired main menu. a
3
Press MCN or MDN to select the desired item from the next sub-menus. a
4
Press MCN or MDN to select the desired setting. a
R This step may vary depending on the feature being programmed.
R To exit the operation, press M
n Using the direct command code
1
(middle soft key) a Enter the desired code.
Example: Press
2
Select the desired setting. a
R This step may vary depending on the feature being programmed.
R To exit the operation, press M
Note:
R In the following table, < > indicates the default settings.
R In the following table,
R Display menu order and sub-menu may vary depending on your model.
Display the menu tree and direct command code table
Main menu:
"Caller List"
Operation
Viewing the caller list.
Main menu:
"Answer System"
Sub-menu 1
Message List
Play New Msg.
Play All Msg.
*1
Erase All Msg.
Greeting
TG80xxAL_NZ(en)_1021_ver001-2.pd23
N.
(middle soft key) #101.
N.
indicates the reference page number.
Sub-menu 2
–
–
–
–
*1
Start REC
(Record greeting)
Play Greeting
*1
Default
(Reset to pre-recorded
greeting)
23
Programming
Code
#213
Settings
Code
–
#329
–
#323
–
#324
–
#325
–
#302
–
#303
–
#304
2011/10/21
15:09:42
33
37
36
36
37
36
36
36
23