The Connection Panel - Samsung 890 Series Installation Manual

1
2
3
4
✎
Whenever you connect an external device to your TV, make sure that power on the TV and the device is turned off.
✎
When connecting an external device, match the color of the connection terminal to the cable.
USB (HDD/1.0A) / CLONING
1
– Connector for software upgrades and Media Play, etc.
– Service connection.
HDMI IN 1, 2, 3(ARC),
2
✎
No separate sound connection is needed for an HDMI to HDMI connection. HDMI connections carry both audio
and video.
✎
Use the HDMI IN 4(DVI)
adapter (DVI to HDMI) for the video connection and the
devices may not or should not need a
✎
It is recommended that the external device of the HDMI 1.3 or 1.4 version will be used with this TV. If you meet the
compatible problem like no sound or the abnormal screen or etc with the device of the HDMI 1.2 version, contact
to the Samsung customer care center. Refer to page 54 for the information of the Samsung customer care center.
3 LAN: Connect to a wired LAN using CAT 7 cable.
ANT IN (AIR/CABLE)
4
– To view television channels correctly, the TV must receive a signal from one of the following sources:
– An outdoor antenna / A cable television system / A satellite receiver
DIGITAL AUDIO OUT
5
AUDIO OUT: Connects to the audio input jacks on an Amplifier/Home Theater.
6
7 EX-LINK: Connect this jack to the jack on the optional RJP (Remote Jack Pack). This will allow you to connect external
devices (Camcoder, PC, DVD players etc.) easily.
[HC890_ZA]Install_Guide_00ENG.indd 7

The Connection Panel

2
5
6
7
4(DVI): Connects to the HDMI jack of a device with an HDMI output.
jack for a DVI connection to an external device. Use a DVI to HDMI cable or DVI-HDMI
DVI AUDIO IN
(OPTICAL): Connects to a Digital Audio component.
@ !
8
PC/DVI AUDIO IN jacks for audio. Some DVI or HDMI
connection for audio.
0
9
7
English
2014-04-02 1:39:13