Dell P2415Q User Manual page 34

Icon Menu and
Submenus
Aspect Ratio
Sharpness
Dynamic
Contrast
Response
Time
Uniformity
Compensation
MST
Reset Display
Settings
Energy
Power
Button LED
34 | Operating the Monitor
Adjust the image ratio to Wide 16:9, 4:3, or 1:1.
Makes the image look sharper or softer.
Use or to adjust the sharpness from '0' to '100'.
Allows you to increase the level of contrast to provide sharper
and more detailed image quality.
Push the button to select the Dynamic Contrast "On"
or "Off".
NOTE: Dynamic Contrast provides higher contrast if you
select Game or Movie preset mode.
Allows you to set the Response Time to Normal or Fast.
Select screen brightness and color uniformity compensation
settings. Calibrated is factory calibrated setting by default.
Uniformity Compensation adjusts different areas of the screen
with respect to the center to achieve uniform brightness and
color over the entire screen. For optimal screen performance,
Brightness and Contrast for some preset modes (Standard ... )
will be disabled when Uniformity Compensation is turned On.
"Off": Default mode - 4k2k 60Hz with MST function Disabled.
"Primary": Set as primary mode at 4K2K 30Hz with MST (DP
out) enabled.
"Secondary": Set as secondary mode at 4K2K 30Hz with MST
(DP out) disabled.
NOTE: Secondary mode can be set using hot key to switch to
DP 1.1 when there is no display. See Troubleshooting.
Restores the display settings to factory defaults.
Allows you to set the state of the power light to save energy.
Description