Table of Contents
Advertisement
Adjusting the OSD settings
--------------------------------------------------------------------
Note: The following content is for general reference only. Actual
product specifications may vary.
The OSD can be used for adjusting the settings of your LCD Monitor.
Press the MENU key to open the OSD. You can use the OSD to adjust the
picture quality, OSD position and general settings. For advanced settings,
please refer to following page:
Adjusting the picture quality
1 Press the MENU key to bring up the OSD.
2 Using the
the picture element you wish to adjust.
3 Use the
/
4 The Picture menu can be used to adjust the Brightness, Contrast, Colour Temp,
6‐axis Saturation, 6‐axis Hue and other image‐related qualities.
5 6‐axis Saturate: Adjust saturation of red, green, blue, yellow, magenta and
cyan 6‐axis Hue: Adjust hue for red, green, blue, yellow, magenta and cyan.
6 Super Sharpness technology can simulate high-resolution images by boosting
the pixel density of the original source. It can make the image more sharper
and clear.
DP mode selection,the default out of DP signal setting
7
is
DP1.2.
User
DP1.2 or DP1.1
Downloaded from ManualMonitor.com Manuals
/
keys, select
keys to adjust the sliding scales.
can follow the setting message to confirm selection of
Picture from the OSD. Then navigate to
EN-15
in B286HK
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the CB280HK and is the answer not in the manual?
Questions and answers
Hoe demonteer is de voet om een bureau beugel te monteren
To disassemble the stand of the Acer CB280HK monitor:
1. Place the monitor on a flat, stable surface.
2. Rotate the base counterclockwise to loosen it.
3. Pull the base downward to detach it from the stand.
4. If necessary, remove any screws securing the stand to the monitor.
5. Attach the desk bracket following the manufacturer's instructions.
Reverse the steps if reattaching the stand.
This answer is automatically generated