CITROEN DS3 Handbook page 211

Putting the wheel back in place
F Put the wheel back in its housing.
F Unscrew the yellow central bolt by a few
turns then place it in the centre of the
wheel.
F Tighten fully until the central bolt clicks to
retain the wheel correctly.
F Put the box back in place in the centre of
the wheel and clip it.
F Put the polystyrene storage box back in
place.
F Refit the boot floor carpet by lightly folding
it in the middle (refer to the "Boot fittings"
section).
Practical information
on vehicles equipped with a "space-
saver" type spare wheel, the punctured
wheel can be stowed in place of the
"space-saver" wheel; however the boot
floor will not then be flat.
209