GE JKP76 Use And Care Manual page 24

How to Auto Cook
1. Place covered food in oven.
2. Press AUTO COOK pad.
AUTO
COOK
3. Press number pad for desired code.
1
4. Press the START pad.
START
How to Adjust the Auto Cook Codes to Suit Your Taste
By simply adding a 1 after any Auto Cook code
number, you can set the oven to cook for 20% less
time than the code would regularly provide.
For example, if Code 5 cooks your chicken more
than you like it, set code 51 next time and you'll get
20% shorter cooking time.
If you want a longer cooking time than a code
provides, add a 9 after the code.
For the chicken in the example above, code 59 would
provide 20% longer cooking time than the regular
code 5 would provide.
24
AUTOMATIC COOKING
(continued)
COOK
CODE
COOK
CODE
For example:
1. Press the AUTO COOK pad.
AUTO
COOK
2. Press number pads 5 and 1 in
5 1
that order.
3. Press the START pad. Do not open
door until first oven control signal,
START
then rotate dish 1/2 turn if necessary.
4. Close door and press START pad to finish cooking.
The word ''AUTO'' shows
on display, indicating steam
sensor is activated. Do not
open door. Opening door
may affect cooking
performance.
The oven control sounds
when steam is sensed and
''AUTO'' is replaced by
Time Cook. Rotate or stir
food, if necessary. When
done, oven control signals
every minute until door is
opened or the CLEAR/OFF
pad is pressed.