Audio Output; Remote Control - Chevrolet 2015 Owner's Manual

2. Press the AUX button a second
time to change the first row
video screen source to the DVD
player and the second row video
screen to the auxiliary device.
3. Press the AUX button a third
time to change the first row
video screen source to the
auxiliary device and the second
row video screen to the DVD
player.
4. Press the AUX button a fourth
time to change the source of
both video screens to the DVD
player.
How to Change the RSE Video
Screen Settings
The screen display mode,
brightness, and language can be
changed from the setup menu using
the remote control. To change a
setting:
z
1. Press .
n q p o
2. Use , , , and
select the settings.
z
3. Press
setup menu.

Audio Output

Audio from the DVD player or
auxiliary inputs can be heard
through the following:
Wireless Headphones
Vehicle Speakers
The RSE system transmits the
audio signal to the wireless
headphones if an audio signal is
available. See Headphones earlier
in this section.
The front seat passengers are able
to listen to playback from the A/V
jacks through the vehicle speakers
by selecting Rear A/V as the source
on the radio.
Video Screens
The video screens are in the center
roof of the first and second rows of
the vehicle.
r
to
again to exit the
Infotainment System
{
Caution
Avoid directly touching the video
screen, as damage may occur.

Remote Control

To use the remote control, aim it at
the transmitter window at either
seatback console and press the
button. Direct sunlight or very bright
light could affect the ability of the
RSE transmitter to receive signals
from the remote control. Check the
batteries if the remote control does
37