Table of Contents
Advertisement
Thank you very much for choosing a NORTHERN TOOL + EQUIPMENT CO., INC. Product! For future
reference, please complete the owner's record below:
Model: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire manual to
become familiar with this product before you begin using it.
This machine is designed for certain applications only. Northern Tool + Equipment cannot be
responsible for issues arising from modification. We strongly recommend this machine is not modified
and/or used for any application other than that for which it was designed. If you have any questions
relative to a particular application, DO NOT use the machine until you have first contacted Northern
Tool + Equipment to determine if it can or should be performed on the product.
For technical questions please call 1-800-222-5381.
This Mini Through-Hole Air Ratchet is designed to work in tight spaces to loosen nuts and bolts while
eliminating the need for deep-well sockets.
Item
Operating Pressure
Maximum Torque
Air Consumption
Inlet Size
Hose Size
Hex Diameter
Adapter Size
Accessories
WARNING:
Read and understand all instructions. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
WARNING:
The warnings, cautions, and instructions discussed in this instruction manual
cannot cover all possible conditions or situations that could occur. It must be understood by the
operator that common sense and caution are factors which cannot be built into this product, but must be
supplied by the operator.
Purchase Date: _______________
INTENDED USE
TECHNICAL SPECIFICATIONS
90 PSI
40ft.-lbs.
4.5 CFM
1/2in.
3/8in.
17mm
1/4in.
10mm, 12mm,13mm Sockets and 1/4in. Bit Holder
GENERAL SAFETY RULES
SAVE THESE INSTRUCTIONS
2 OF 8
Description
Advertisement
Table of Contents
