NETGEAR WN2000RPT Installation Manual page 19

Will the extender work if I connect it to the router with an
Ethernet cable?
No. The extender is designed to connect wirelessly to the router or
access point.
What are the user name and password to log in to the extender?
The user name is admin, and the default password is password.
Both are case-sensitive.
How do I restore the extender to its factory default settings?
1. Use a sharp object such as a pen or paper clip to press and hold
the Restore Factory Settings button on the extender for at
least five seconds until the Status LED blinks amber.
2. Release the Restore Factory Settings button and wait for the
extender to reboot.
The extender resets and returns to the factory default settings.
You can now access the extender from your web browser using
the factory default settings.
19