A & D Board Removal - Sony Trinitron HMD-A240R Service Manual

1-3. A & D BOARD REMOVAL
4
3
1
Remove (1) screw (+BVTP 3 x 8) from the cable holder
at the rear of the chassis base to release the cable.
2
Remove (2) screws (+BVTP 3 x 8) from the rear of the
chassis base and remove.
3
Remove (2) screws (+BVTP 4 x 16) from the chassis
base and slide out to remove.
4
Remove (7) screws (+BVTP 3 x 8) from the D Board.
Lift the board up and out to remove.
5
Carefully remove the solder connections, and remove
the shield cover from the A Board
6
Gently wiggle the A Board back and forth, and pull it to
remove.
2
— 8 —
6 5
1
HMD-A240R