T-Fal 1549 User Manual page 4

What temperature and which steam setting to use ?
FABRIC
LINEN
COTTON
WOOL
SILK
SYNTHETIC
Polyester, Acetate,
Acrylic, Nylon
Moistening the fabric (Spray)
- When steam or dry ironing, press several times on the Spray Button to moisten fabrics (H)
and to remove stubborn creases.
- Make sure that there is water in the reservoir before using this feature.
Recommendations:
Fabrics and ironing temperatures:
• Your iron heats up quickly: begin by ironing fabrics that require a low temperature, then go on to
those requiring a higher temperature;
• If you reduce the temperature, wait until the indicator light comes back on before ironing again.
• When ironing fabrics with mixed fibres, set the temperature to the most delicate of the fibers.
Obtaining more steam for removing wrinkles
(depending on the model)
- Press the Burst of Steam button ( ) from time to time (I).
- Wait a few seconds before pressing the button again.
Vertical steam ironing
- Hang the garment on a hanger and hold the fabric slightly taut with one
hand.
- Set the thermostat control on MAX (J).
- Press the Burst of Steam button ( ) repeatedly (K), moving the iron
from top to bottom (L).
- Hold the iron a few inches from the fabric to avoid burning delicate
fabrics.
Auto Shut off security feature
- The electronic system automatically cuts off the electric power and the Auto Shut off
indicator light blinks if the iron remains immobile on its heel for more than 8
minutes, or in a horizontal position for more than 30 seconds.
- To restart the iron, just shake it gently until the indicator light stops blinking.
Note : When the Auto Shut off security feature is on,
it is normal that the thermostat indicator light to be off.
POSITION OF
THERMOSTAT CURSOR
MAX
(depending on the model)
(depending on the model)
STEAM SETTING
POSITION
MAX
MIN
DRY
= STEAM ZONE
H
I
J
J
K L
M