Installation Instructions/Use and Care Guide Hot Water Dispenser Important: Read and save these instructions. IMPORTANT: Installer: Leave Installation Instructions with homeowner. Homeowner: Keep Installation Instructions for future reference. Save Installation Instructions for local electrical inspector’s use. Part No. 3184330...
Before you start... Check location where hot water dispenser will be installed. Proper installation is your responsibility. Make sure you have everything necessary for correct installation. It is the responsibility of the installer to comply with installation specifications provided and with state and local plumbing codes.
If local codes permit, the hot water dispenser feed line should be connected to the cold water supply line using a saddle tapping valve. The saddle tapping valve supplied is designed for use with 3/8”...
Installation With hot water dispenser in kitchen. Determine the best faucet mounting position that will allow faucet spout to empty into sink. Check below sink to assure that reinforcing ribs, support brackets or cabinet construction will not interfere with faucet mounting.
To get the most efficient use from your new hot water dispenser, read the Use & Care Information. Keep Ins talla tion lnstruc tions4Jse & Care Guide close to hot water dispenser for easy reference.
Do Not deform tubing. Water has a “rotten egg” taste. A. Hot water dispenser is attached to hot water line. Attach to cold water line. B. Install a water filtration system on cold water line to dispenser.
INSTALLATION. workmanship. Service 4.) Correct house plumbing. must be provided by a B. Repairs when Instant Hot Water Dispenser is used in other than KitchenAid-authorized normal home use. servicing outlet. C. Damage resulting from accident, alteration, misuse, abuse, improper installation or installation not in accordance with local electrical or plumbing codes, D.