Advertisement
You can also reset the AC1130A to its default settings
or restart it remotely.
WARNING: BE CAREFUL WHEN MAKING CHANGES.
ANY MODIFICATION TO DEFAULT SETTINGS MAY REQUIRE
CORRESPONDING CHANGES TO COMPUTERS CONNECTED TO THE
AC1130A.
1.
Open Internet Explorer and type the AC1130A server
IP address (default is http://192.168.100.10) at the
address bar. Click "Admin" and enter the password
(default password is admin).
2.
Here is the information that can be found under
"System Status":
"Network Setup"
3.
Network configuration, including changes to IP, DHCP
Server, Wireless, and GateKeeper, is under "Network
Setup."
Please consult your network administrator for changes
needed for IP, DHCP Server, and Wireless Setup when
integrating the AC1130A into an existing local network.
The GateKeeper feature has three options; All Block, All
Pass, and Internet Only. All Block will not allow
Internet or office network access; All Pass allows
office network access and Internet access; and Internet
Only doesn't allow office network access but still
allows Internet access. This feature is only active when
the AC1130A is connected to a local area network, the
Internet, or both.
Advertisement
