Advertisement
7.
Click on "WPS." The program will search the
network. At the prompt, enter the 4-digit login code.
NOTE: If WPS fails to connect, make sure you have the
correct login code and that your wireless card
connection is properly configured.
After a successful login, click OK on the next prompt.
This might change your screen resolution. Once you exit
the application, your computer screen will go back to
its original settings.
8.
Click "Play" to start sending your computer
screen's contents to the projector.
NOTE: For video streaming, see "Playing Streaming Video"
in the WPS Application Software section.
WPS A
S
PPLICATION
OFTWARE
1.
WPS application software is built into the module
and accessible through Internet Explorer. Its default
IP address is 192.168.100.10. You can change it in the
WPS Admin section.
2.
After you log in successfully, these are two main
user interfaces:
Standard Mode (Screen Mirroring):
Video Streaming Mode:
(appears when you click on "Video" from Standard Mode)
The following are the buttons and their functions:
Presentation Mode
Video Mode
Start Projecting
Advertisement
