Advertisement
3.
Turn on the projector; then turn on the AC1130A.
Wait until you see the screen below on your projector:
From the projector's screen, note the 4-digit login
code, SSID, and Server IP address. You will need this
to install the player software.
4.
Connect your computer to AC1130A wireless network
(SSID: WPS). Most computers will automatically connect
to the available wireless access point. Otherwise,
click on your computer's wireless utility to select WPS
to connect.
5.
Opening
Internet Explorer and type the Server IP
address shown on the screen (default is
http://192.168.100.10) in the address bar. You should
see the screen below:
6.
Click on "Download." At the prompt, enter the
default password, which is "user." Then click on the
"Download" button located on the right side of the
screen. Click on "Run" and follow the instructions to
install the player software. It will create a desktop
icon called "WPS."
Advertisement
