Advertisement
Battery installation & charging
Install the battery as shown below. After installing the battery, you can
make and receive short calls, but replace the handset in the telephone
base when not in use. For optimal performance, charge the handset battery
for at least 6 hours before use. When fully charged, the handset battery
provides approximately five hours of talk time or six days of standby time.
If the handset has not been used for a long time or if the battery inside is
completely depleted, put it on the telephone base for recharging.
Step 1
Insert the battery plug as
indicated, making sure that
it matches the color-coded
label inside the battery
compartment.
Step 4
Charge the handset, by placing the handset
face up in the telephone base. The CHARGE
light on the handset should be on as soon as
the handset is properly placed on the telephone
base.
IMPORTANT INFORMATION
Use only the supplied rechargeable battery, replacement battery (part number 89--00-00) or
equivalent. To order a replacement battery, visit our website at
www.telephones.att.com
1 (866) 288-4268
Step 2
Place the battery
and wires inside the
compartment.
1 (800) 222-3111
or call
.
CHARGE
light
Step 3
Slide the battery
compartment cover
up until it clicks.
REMOVE
.
In Canada, dial
Advertisement
