Dimplex LST050 Operating Instructions Manual page 19

Low surface temperature heater
Hide thumbs Also See for LST050:
Table of Contents

Advertisement

Important
During the initial operation, some odour may
be noticed due to the newness of materials
used in manufacture. This is normal and will
disappear after a short period or use. It is
however advisable to keep the room
well ventilated.
Cleaning
WARNING
-
ALWAYS
FROM THE POWER SUPPLY BEFORE
CLEANING THE HEATER.
Before commencing cleaning, disconnect
the electricity supply to the appliance and
allow it to cool. The outside can be cleaned
by wiping it over with a soft damp cloth and
then dried. Do not use abrasive cleaning
powders or furniture polish, as this can
damage the surface fi nish. To release the
heater from the wall bracket for cleaning
or redecoration, remover the screw from
the wall bracket and lift the heater upwards
(See Fig. 1 and 2, page 5).
Recycling
For electrical products sold within the
European Community. At the end of the
electrical products useful life it should not
be disposed of with household waste.
Please recycle where facilities exist. Check
with a Local Authority or retailer for recycling
advice in your country.
After Sales Service
If this product appears damaged when
fi rst received or does not function correctly
contact us by e-mail at
aftersales@dimplex.co.uk or
call 0844 879 3588.
For ROI please call 01 842 8222.
Do not return the product in the fi rst
instance as this may delay us providing you
with a satisfactory service. ACCIDENTAL
DAMAGE IS NOT COVERED UNDER
THE WARRANTY.
Your product is guaranteed for two years
from the date of purchase. Within this period
DISCONNECT
we undertake to repair or exchange this
product free of charge provided it has been
installed and operated in accordance with
these instructions.
Should you require assistance with this
product please go to www.dimplex.co.uk
and click on "Customer Support" or e-mail
us at aftersales@dimplex.co.uk
Alternatively call our contact centre on
0844 879 3588 (UK only). This is a Lo-call
number from a BT Landline - other providers
including mobile phones may charge you
more. For ROI please call 01 842 8222.
To assist you, we need the following
information: model number and product
ID (these are found on the side of the
appliance), nature of the fault and date of
purchase. Please retain your receipt as
proof of purchase. Your rights under this
guarantee are additional to your statutory
rights, which in turn are not affected by
this guarantee.
19

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lst075Lst100Lst150

Table of Contents