Table of Contents
Advertisement
desired station with either the manual tuning knob
or SCAN tuning. Press the ENTER touchbutton. Then,
within 5 seconds, press a touchbutton, 1 through 8,
and the station tuned will be recorded in the elec-
tronic memory.
The preset memory circuits are maintained by a
special long life battery power supply. It will retain
the instructions for years.
M. SCAN
Use the SCAN touchbuttons to automatically
tune to the next station either up or down the
selected broadcast band. The arrow beside the
touchbutton indicates the direction of scan.
N. TUNING KNOB
Rotate the tuning knob until the correct
frequency shows in the display area. Manual
tuning is automatic when you turn the tuning
knob.
A station is correctly tuned when only the
center dot of the TUNING display lights. On each
side of the center dot are horizontally display
(
) arrows. One of these will light as a station
is approached to indicate tuning above or below
the center frequency of the FM station. On AM,
the TUNING display arrows are not lighted.
10 FRONT PANEL CONTROLS
Hide quick links:
Advertisement
Table of Contents
