Table of Contents
Advertisement
Taking Photos
When the VS-260C is mounted on a compatible camera, it will set the appropriate flash level automatically, in
conjunction with the camera's through-the-lens (TTL) metering system.
For information about your camera's flash sync speed range (the shutter speed range your camera will allow
you to use when taking flash photos), consult your camera manual.
To take photographs with the flash, turn the flash and camera on and follow these steps:
1.
Press the shutter-release button on your camera halfway to ensure that the camera is communicating
with the flash. A flash icon will appear in the camera's viewfinder, and if your camera has an E-TTL or
E-TTL II metering system, the ETTL light on the VS-260C will glow amber.
2.
Press your camera's shutter-release button to take the picture. The OK light will glow green momentarily
to indicate that the proper exposure was attained.
|
Taking Photos
15
Advertisement
Table of Contents
