Symbols Used In This Manual - Fujitsu ScanSnap S510 Getting Started Manual

Le présent appareil numérique n'ément pas de parasites
radioélectriques dépassant les limites applicables aux
appareils numériques de la classe B et prescrites dans
le Réglesment sur le brouillage radioélectrique dictées
par le Ministere des Communications du Canada.
Cet appareil numérique de la classe B est conformme à
la norme NMB-003 du Canada.
Bescheinigung des Herstellers /
Importeurs
Für den S510 wid folgendes bescheinigt:
•
In Übereinsstimmung mit den Bestimmungen der
EN45014(CE) funkentstört
•
Maschinenlärminformationsverordnung 3. GPSGV:
Der höchste Schalldruckpegel beträgt 70 dB (A)
oder weniger, gemäß EN ISO 7779.
E
International NERGY
E S
As an NERGY TAR
Partner, PFU LIMITED has
determined that this product
E
meets the NERGY
®
S
TAR guidelines for
energy efficiency.
E
The International NERGY
®
S
TAR Office Equipment Program is an international
program that promotes energy saving through the
penetration of energy efficient computers and other
office equipment. The program backs the development
and dissemination of products with functions that
effectively reduce energy consumption. It is an open
system in which business proprietors can participate
voluntarily. The targeted products are office equipment
such as computers, monitors, printers, facsimiles,
copiers, scanners, and multifunction devices. Their
standards and logos are uniform among participating
nations.
Use in High-safety Applications
This product has been designed and manufactured on
the assumption that it will be used in office, personal,
domestic, regular industrial, and general-purpose
applications. It has not been designed and
manufactured for use in applications (simply called
"high-safety applications" from here on) that directly
involve danger to life and health when a high degree of
safety is required, for example, in the control of nuclear
reactions at nuclear power facilities, automatic flight
control of aircraft, air traffic control, operation control
in mass-transport systems, medical equipment for
sustaining life, and missile firing control in weapons
systems, and when provisionally the safety in question
S ®
TAR Program
®
is not ensured. The user should use this product with
adopting measures for ensuring safety in such
high-safety applications. PFU LIMITED assumes no
liability whatsoever for damages arising from use of
this product by the user in high-safety applications, and
for any claims or compensation for damages by the
user or a third party.
About the use of mercury
Lamp(s) inside this product contain mercury and
H
g
must be recycled or disposed of according to
local, state, or federal laws.
To avoid unexpected injuries:
• Do not put the substance in the lamp in your mouth
as it contains mercury.
• Do not incinerate, crush, or shred the scanner.
• Do not breathe the chemical liquid contained in the
scanner parts.
Conventions
Warning Indications Used In This Manual
This sign warns the operator that improper
use, indicated with this sign, may cause death
WARNING
or severe injury of the operator or people in
the vicinity, if not followed.
This sign warns the operator that improper
use, indicated with this sign, may cause minor
CAUTION
injury of the operator, or damage to equipment
or property, if not followed.

Symbols Used In This Manual

This manual uses the following symbols in
explanations in addition to warning indications
This symbol alerts operators to particularly
important information. Be sure to read this
information.
This symbol alerts operators to helpful advice
HINT
regarding operation.
A TRIANGLE symbol indicates that special care
and attention is required.
The drawing inside the triangle shows the specific
caution.
A CIRCLE with a diagonal line inside shows action
which users may not perform.
The drawing inside or under the circle shows the
specific action that is not allowed.
Outline characters on a colored background show
R
instructions users should follow.
It may also include the drawing that shows the
specific instruction.
ScanSnap S510 Getting Started | 3