Fujitsu Eternus DX80 S2 Instal Setup page 8

Initial Configuration Web GUI (3)

General status information of the ETERNUS DX S2 system
Indicator
Initial Setup ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2
Colour
Green Each component is in normal status
Orange Component is under maintenance (self test)
Preventive maintenance is required for some components.
Yellow
Pinned data is detected.
This status sign is displayed under the following conditions
Red

Component failure is detected

Loop Down is detected
This status sign is displayed under the following conditions

Abnormal status is detected at power on

Abnormal status is detected at power off, the system has not
Red
started up normally

Error during restoration of the operating environment at power-
on

The system is abnormal
Description
7 Copyright Fujitsu Technology Solutions, Release August 2011