AV TOOL AVT-6544 Instruction Manual

4x4 hdmi matrix switcher

Advertisement

Quick Links

Instruction Manual

AVT-6544
4x4 HDMI Matrix Switcher

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AVT-6544 and is the answer not in the manual?

Questions and answers

Summary of Contents for AV TOOL AVT-6544

  • Page 1: Instruction Manual

    Instruction Manual AVT-6544 4x4 HDMI Matrix Switcher...
  • Page 4: Table Of Contents

    Table of Contents Introduction Specifications Package Contents Connecting the Hardware Operating The Unit Troubleshooting Limited Warranty Regulatory Compliance Contact Information...
  • Page 5: Introduction

    Thanks for purchasing this AVT-6544 4x4 HDMI Matrix Switcher from the AV Toolbox division of TV One. The AVT-6544 provides the capability to assign any of four HDMI inputs to any of the four HDMI outputs. The AVT-6544 senses when a valid HDMI connection has been made to either the input or output.
  • Page 6: Specifications

    External Power Supply 9VDC@3A Regulatory Approvals Amplifier Units FCC, CE, RoHS Power Supplies UL, CUL, CE, PSE, GS, RoHS Accessories Included 1x Power Adapter US, UK or Euro 1x Infrared Control 1x Operations Manual Product Item Numbers AVT-6544 4x4 HDMI Matrix Switcher...
  • Page 7: Package Contents

    Model Number, Serial Number and Invoice available for reference when you call. CONNECTING THE HARDWARE The AVT-6544 has a single LED that indicates when power has been applied, an Infrared remote control sensor located behind a square translucent window next to the power on/off button, four sets of four buttons that allow signal selection for the four outputs and signal selection indicator LEDs.
  • Page 8: Operating The Unit

    7. Turn on power to the source Devices. Note: The AVT-6544 uses Output 1 as the primary EDID source for all Inputs. If there is no display connected to Output 1 the AVT-6544 will use a built in “compatibility” EDID.
  • Page 9: Troubleshooting

    HDMI signal to the output for the desired output. Note that once the AVT-6544 is receiving power, you can change the input cables to different HDMI sources and the AVT-6544 will recognize that you have plugged in a new HDMI source and light the white LED above the appropriate input (if there is a valid HDMI signal present).
  • Page 10: Limited Warranty

    REGULATORY COMPLIANCE The AVT-6544 4x4 HDMI Matrix Switcher has been tested for compliance with appropriate FCC and CE rules and regulations. The Power Adaptor/Supplies have been tested for compliance with appropriate UL, CUL, CE, PSE, GS Rules, Regulations...
  • Page 11: Contact Information

    CONTACT INFORMATION Should you have questions or require assistance with this product in areas not covered by this manual, please contact AV Toolbox at the appropriate location. AV Toolbox AV Toolbox A division of TVOne A division of TV One Ltd 2791 Circleport Drive Continental Approach Erlanger, KY 41018...

Table of Contents