ViewSonic VG920-1 Service Manual page 34

2 Setup Procedure
2.1 Connect P2 of Fixture with printer port of PC by LPT Cable.
2.2 Connect P1 of Fixture with VG720/VG920 Monitor by VGA Cable.
2.3 Plug Power Adapter to Fixture.
2.4 Connect Power Cord to VG720/VG920 Monitor.
2.5 Connect P3 to the Signal Generator (eg.Chroma2326) for verifying it after the
operation being completed.
2.6 Connect PC to the additional monitor.
JP1 to Power Adapter
P1 to VGA Cable
P3 to Signal Generator
P2 to LPT Cable
3 Firmware Upgrade Procedure
Step 1. Let VG720/VG920 set to be connected with AC cable and VGA cable.
Step 2.Execute the MSstar ISP tool.
Confidential - Do Not Copy
ViewSonic Corporation VG920-1
31