ViewSonic VG920-1 Service Manual page 15

SHORT CUTS FUNCTION FROM THE BUTTONS
[1]
[2]
[▼] or [▲]
[▼] + [▲]
[ +] or [ -]
[ +] + [ X]
[1] + [2]
[1] + [ X]
[2] + [▼]
[1] + [▲]
Remark : All the short cuts function are only available while OSD off
ViewSonic Corporation
Main Menu
Input toggle (Analog or Digital).
To immediately activate Contrast menu. It should be
change to Brightness OSD by push button [2]
recall both of Contrast and Brightness to default
To immediately activate Volume menu for audio volume.
Recall volume to default
toggle 720x400 and 640x400 mode when input 720x400
or 640x400 mode
White Balance. (Not shown on user's guide)
• Power Button Lock: Press and hold "[2], & ▼" for 10
seconds. If the power button is pressed the message
Power Button Locked will display for 5 seconds. With or
without this setting, after a power failure, your LCD
display's power will automatically turn ON when power is
restored.
• Power Button Unlock: Press and hold "[2], & ▼" again
for 10 seconds.
• OSD Lock: Press and hold "[1], & (▲)" for 10 seconds.
If any buttons are pressed the message OSD Locked will
display for 5 seconds.
• OSD Unlock: Press and hold "[1], & ▲" again for 10
seconds.
12
Confidential - Do Not Copy
VG920-1