Adjusting the Screen Image ...7 Main Menu Controls ...9 Other Information Specifications ...13 Troubleshooting...14 Customer Support ...15 Cleaning the LCD Display ...16 Limited Warranty ...17 Appendix Safety Guidelines ...18 Compliance Information for U.S.A...19 CE Conformity for Europe ...19 06/24/04 C ViewSonic VG910b/VG910s...
NERGY Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this mate- rial, or the performance or use of this product.
NOTE: User Guide PDF files and INF/ICM display optimization files. The INF file ensures compatibility with Windows operating systems, and the ICM file (Image Color Matching) ensures accurate on-screen colors. ViewSonic recommends that you install both files. Precautions • Sit at least 18" from your LCD display.
NOTE: Windows users may receive a message asking them to install the INF file. This is on the CD. 5 Insert the ViewSonic Wizard CD into the computer’s CD drive. Follow the on-screen instructions If your computer does not have a CD-ROM drive, see “Customer Support."...
Installation of Wall Mount (Optional) To obtain a wall-mounting kit, contact ViewSonic or your local dealer. Refer to the instructions that come with the base mounting kit. To convert your LCD from a desk-mounted to a wall-mounted display, do the following: Four screw holes for wall mount Disconnect Power.
LCD display’s power will automatically turn ON when power is restored. Power Button Unlock: Press and hold [1] and the down arrow seconds. controls ® ▲ for 10 seconds. If any ▲ again for 10 seconds. ▼ for 10 ▼ again for 10 ViewSonic VG910b/VG910s...
Displays the control screen for the highlighted control. Also toggles between two controls on some screens. Also a shortcut to toggle between analog and digital connections. ViewSonic ® Power light Green = ON Orange = Power Saving Power On/Off VG910b/VG910s...
Page 9
"active area" of the LCD display.) ▲ ▼ to scroll up or down the The line at the bottom of the screen tells you what you can do next: Exit or select the Brightness control. ▲ ▼ or down buttons. ViewSonic VG910b/VG910s...
Contrast (black level) and the foreground (white level). Brightness Input Select computer connected to the VG910b/VG910s. Audio Adjust increases the volume, decreases the volume, and mutes Volume the audio. adjusts the proportion of sound coming from each Balance speaker.
Page 11
To adjust selected color, press Important: If you select RECALL from the Main Menu when the product is set to a Preset Timing Mode, colors return to the 6500K factory preset. provides several color adjustment modes: preset ▲ ViewSonic ▼ VG910b/VG910s...
Page 12
Vertical Position adjusts the width of the screen image. Horizontal Size sharpens focus by aligning the illuminated text and/ Fine Tune or graphic characters. adjusts the clarity and focus of the screen image. Sharpness ViewSonic VG910b/VG910s...
Page 13
Resolution Notice menu shown advises the optimal resolution to use. allows you to move the on-screen display menus sets the length of time an on-screen display allows you to turn the On-Screen-Display returns adjustments to the original factory ViewSonic VG910b/VG910s...
Warning: Do not set the graphics card in your computer to exceed these refresh rates; doing so may result in permanent damage to the LCD display. Macintosh computers older than G3 require a ViewSonic contact ViewSonic. 19" (full 19" viewable diagonal area), TFT (Thin Film Transistor), Active Matrix SXGA LCD, 0.294 mm pixel pitch...
Loose or broken pins in the cable connector could cause an improper connection. • Connect the LCD display to another computer. • If you have an older graphics card, contact ViewSonic for a non-DDC adapter. Control buttons do not work •...
LCD display screen or case. Some chemical cleaners have been reported to damage the screen and/or case of the LCD display. ViewSonic will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners.
If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.
If you have any questions concerning which proper power cord to use, please consult with the dealer from whom you have purchased the product. Switzerland ... SEV Britain ... BASE/BS Japan ... Electric Appliance Control Act Figure A2 Maximum Current Rating of Unit 10 Amps 12 Amps 12 Amps 10 Amps 12 Amps ViewSonic VG910b/VG910s...
CE Conformity for Europe The device complies with the requirements of the EEC directive 89/336/EEC as amended by 92/31/EEC and 93/68/EEC Art.5 with regard to “Electromagnetic compatibility,” and 73/23/EEC as amended by 93/68/EEC Art.13 with regard to “Safety.” ViewSonic VG910b/VG910s...