Advertisement
Installation and setup
After installation, place the handset in the base and allow batteries to charge for 16
hours before use.
Press tab and slide
cover away from the
battery compartment.
Plug power adapter into
electrical outlet not con-
trolled by a wall switch.
Caution: Use only supplied rechargeable battery or AT&T replacement battery model 103 (SKU 00249. Part
number 89-0429-00-00).
NOTE: Use only the power cord supplied with this product. If you need a replacement, call 1 (800) 222-3111. In
Canada, call 1 (866) 288-4268. Be sure to use an electrical outlet not controlled by a wall switch.
Insert supplied bat-
tery as indicated. The
top edge (contacts
and tab) needs to be
inserted first, then
push down on the
lower portion.
1
2
Plug the telephone
line cord into
telephone jack.
NOTE: For
installation of
the spare battery into
the spare battery
compartment on the
telephone base,
please see page 71 of
the user's manual.
Replace battery
compartment cover.
Place handset in base
to charge for at least 16
hours before first use.
When charging, the
CHARGE light should
be on.
FLASH
CANCEL
Advertisement
