NEC MD462OR Installation & Maintenance Manual page 13

PIP (Picture In Picture) button
ON/OFF button: Toggle switches between PIP, POP,
PICTURE BY PICTURE-ASPECT and PICTURE BY
PICTURE-FULL.
INPUT button: Selects the "picture in picture" input signal.
CHANGE button: Replaces to the main picture and sub
picture.
Note: Enable to change the sub picture size by pressing
SET/POINT ZOOM button during PIP mode.
Main picture Connector
DPORT* DPORT*
DPORT DPORT DisplayPort DisplayPort No No
DVI DVI DVI-D DVI-D Yes Yes
HDMI HDMI HDMI HDMI Yes Yes
VGA VGA Yes Yes
4
D-Sub* D-Sub*
Y/Pb/Pr Y/Pb/Pr Yes Yes
OPTION OPTION Option Option Yes Yes
*3: When VIDEO OUT SETTING is ON, DPORT cannot be selected as the sub picture. *3: When VIDEO OUT SETTING is ON, DPORT cannot be selected as the sub picture.
*4: If VGA or Y/Pb/Pr is selected as the main picture, DP out is disabled even when *4: If VGA or Y/Pb/Pr is selected as the main picture, DP out is disabled even when
VIDEO OUT SETTING is ON. VIDEO OUT SETTING is ON.
*5: DP out can output signal only when VIDEO OUT SETTING is ON. *5: DP out can output signal only when VIDEO OUT SETTING is ON.
REMOTE ID button
Activates REMOTE ID function.
MTS button* 1
1
button*
Activates closed captioning.
Note: VIDEO* 2 , S-VIDEO*
*1: This button's action depends on which option board you use.
Refer to the option board's manual for further information.
*2: This function depends on which option board you use.
01_English.indd 11 01_English.indd 11
Sub picture
3 DVI DVI HDMI HDMI VGA VGA Y/Pb/Pr Y/Pb/Pr OPTION OPTION
Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
No No Yes Yes Yes Yes Yes Yes Yes Yes
Yes Yes No No Yes Yes Yes Yes Yes Yes
Yes Yes Yes Yes No No No No Yes Yes
Yes Yes Yes Yes No No No No Yes Yes
Yes Yes Yes Yes Yes Yes Yes Yes No No
2 inputs only.
DP Out* 5
DPORT DPORT
DVI DVI
HDMI 1 HDMI 1
-
-
OPTION OPTION
English-11
5/22/14 9:45:35 AM 5/22/14 9:45:35 AM