Franklin 5-LANGUAGE EUROPEAN TRANSLATOR User Manual page 6

1. Press
to select Disable Demo .
2. Use
3. Press
ENTER
4. To re-enable the demonstration, repeat the above
steps. Enable Demo will appear as the selection in
Step 2 above.
To Adjust the Screen Contrast
1. Press
CLEAR
2. Use or
trast.
Note: You can adjust the screen contrast only when you are
at the source language screen.
Auto-Shutoff
If you forget to turn this translator off, it will
shut off in two minutes. When you turn on your
translator again, operation resumes with your
current settings.
About Screen Illustrations
Some screen illustrations in this User's Guide may
differ from what you see on the screen. The ex-
amples in the English section of this User's Guide
use English as the message language.
Getting Started
then press
H
.
to return to the source language screen.
to darken or lighten the screen con-
to access the Setup menu.
5