Table of Contents
Advertisement
Downloaded From Disc-Player.com Toshiba Manuals
Using the automobile/vehicle adapter or power port
For use of the DVD player in a car, this adapter can
power the DVD player from the cigarette lighter socket.
WARNING
• NEVER place a DVD player within the eyesight of a driver
while he/she is driving an automobile/vehicle. Note: A DVD
player located in the front seating section of a vehicle is
illegal in many jurisdictions.
Failure to observe the above instructions could result in the
driver's inattention to and/or distraction from road hazards.
• NEVER place a DVD player in a location where it could
interfere with the proper deployment and/or performance of
an air bag.
Failure to observe this instruction could result in the
prevention of an air bag to properly and/or effectively deploy.
• Do not use an adapter other than the model supplied, to
power the player. Do not use the supplied vehicle adapter to
power an apparatus other than this player. Neglecting these
may cause smoke, fire or electrical shock to human body.
• This adapter is intended for exclusive use in automobiles/
vehicles with a DC 12V negative ground electrical system.
NEVER use this adapter with a DC 24V configured or a DC
12V positive ground electrical system automobile/vehicle.
Consult your vehicle owner's manual before using this
adapter.
• ALWAYS use caution when touching the adapter, cigarette
lighter socket or power port. The adapter, lighter socket and
power port may become heated after prolonged use.
• Do not touch the adapter with wet hands. Do not get liquid
66
on the adapter.
4
The LED illuminates
when powered.
1 Turn off the player.
2 Turn on the vehicle engine so that the cigarette
lighter socket or power port is powered.
Some vehicles may power the cigarette lighter
socket or power port even when the engine is
not running. In this case, you will only insert the
vehicle adapter into it. The power indicator of the
adapter will turn on.
3 Insert the plug of the adapter into the cigarette
lighter socket or power port fully.
4 Insert the pin plug of the adapter into the DC IN
12V jack of the DVD player.
5 Turn on the DVD player.
ON
2
3
Advertisement
Table of Contents
