Site List; Description - Dedicated Micros Pick-a-point User Manual

Site List

The site list window allows the operator to select different sites or site map levels. After selecting a site map
level, the displayed map will change and the camera icons will be shown on the map.
Local and Remote Sites
Remote sites can be selected from the 'Site List' button.
1) Click on 'Sitelist' to open the list of sites
2) Click on the tab labelled 'Local Sites' or 'Remote Sites'.
2) Select the required site in the list to display it.
Note: The cameras on the remote sites cannot be selected from the touch screen keyboard. Also there are no
hotspots on the remote sites as they have no connection to each other, or to the local sites.
Changing Monitors

Description

Disconnect Selected Monitor.
Disconnect All Monitors.
Reconnect Sequence monitors.
16
This button disconnects the currently selected monitor from the system.
This is used to reduce the bandwidth required by the system.
Disconnects all monitors this would be used where 24 hour monitoring is
not required.
Reconnect disconnected monitors and runs a pre-programmed sequence
on the monitors (when enabled).