Advertisement
You'll need to decide how you will connect
the audio so you can hear it in your vehicle.
a.
The chart to the right shows the
possible audio connection options and
their quality. Also consult the three
sections in the next panel for more
information about each type of audio
connection option.
b.
The Audio check screen should be
displayed. If you cannot hear the audio
playing, tap No.
C.
You will be prompted to continue with the
audio setup. Tap
Continue.
oo
[J
D••~
o~
PowerConnect
*The FMDA or Cassette Adapter can be
purchased separately from your local
retailer or from
shop.siriusxm.com/
accessories. Professional installation is
recommended for the FMDA.
How will you connect your audio?
.,
Audio (AUX)
•
Best
d.
At the How will you connect your audio?
screen, select your desired audio connection
and tap Continue.
P'
Bluetooth A2DP- Better
,..:.
Cassette Addpter. Good
~
FM-Good
e.
Continue to follow the on-screen instructions
until you reach the Activation screen.
Continue
f.
You should now be hearing the SiriusXM audio. Connect the Vehicle Dock to
the Vent Mount if you are using the Vent Mount.
g.
Proceed to the Subscribe section on the opposite side of this Quick Start
Guide.
Should you should decide to change your type of audio connection at a later
time,
you can adjust the settings by tapping Home
.0.,
tap
)
,
tap Settings
$
.
tap Mode,
and tap Vehicle Dock.
Aux In Cable (or Cassette Adapter) Audio Setup:
If your vehicle radio has an AUX jack, the Aux In Cable connects Lynx to your
vehicle radio for the audio. If your vehicle has a cassette player, you can also use
an optional Cassette Adapter (sold separately) for the audio.
Bluetooth Stereo Audio Setup:
If your vehicle has
8/uetooth®
stereo audio streaming
compatibility (A2DP Profile), you can connect it
with Lynx for audio. Lynx is not compatible with the
Hands Free Profile
(HFP),
which is typically used
for a Bluetooth connection to a cellphone. Refer
to the Lynx Radio Quick Start Guide for additional
information on connecting the audio using
8/uetooth.
PowerConnect Audio Setup:
PowerConnect plays the audio through your
vehicle 's FM radio, when Lynx and your vehicle's
FM radio are both tuned to the same FM channel.
l~
l ·
f@)
~
93
Uf'i
3
b~
MATCH FM CHANNELS
Advertisement
