Advertisement
i-soamp-2
The
has a max. current requirement
of 15A per amplifi er. In a few vehicles and when
connecting to two amplifi ers, the radio wiring
cannot cover this power requirement.
i-soamp-2
The
must then be connected directly
to the battery. (See 1.7)
Loudspeaker Wiring Diagram „Front + Sub-
woofer"
Loudspeaker wiring diagram subwoofer:
after the cable harness of the
been connected to the compact plug at the
i-soamp-2
, the subwoofer is connected as
follows:
1. The vehicle cable harness ISO loudspeaker plug
2. The ISO loudspeaker of the i-soamp cable
3. The ISO loudspeaker receptacle of the
4. The two 4-pole plugs are removed.
i-soamp-2
has
5. The 4-pole plug at the
6. The power connection is made in accordance
7. The free ISO loudspeaker receptacle at the
–
–
9
is removed from the car radio. The ISO loud-
speaker of the Y cable AD-0124 is connected
to the ISO loudspeaker receptacle of the car
radio.
harness is connected to one of the two ISO
loudspeaker receptacles of the split-adaptor.
cable harness is not used.
i-soamp
serves as a connector for the subwoofer.
i-sotec
Please use the original
connector cable for the connection or the
adaptor cable AD-0126 (subwoofer connector
cable 5m).
with Chapter 1.7
split-adaptor is used for connecting the second
i-soamp-2
, which drives the front loudspeakers.
i-soamp
cable harness
subwoofer
Advertisement
