1. Manuals
  2. Brands
  3. I-Sotec Manuals
  4. Car Amplifier
  5. i-soamp-4
  6. Quick manual

I-Sotec i-soamp-4 Quick Manual

Hide thumbs Also See for i-soamp-4:
Table of Contents

Advertisement

Quick Links

See also: Manual
Инструкция
I-Sotec i-soamp 4
Перейти в карточку товара
8 800 775 98 98

Advertisement

Table of Contents
loading

Related Manuals for I-Sotec i-soamp-4

Summary of Contents for I-Sotec i-soamp-4

  • Page 1 Инструкция I-Sotec i-soamp 4 Перейти в карточку товара 8 800 775 98 98...
  • Page 2 THE EASY WAY TO GET MORE MUSIC! Manual easy better way to make it...
  • Page 3 4-channel car audio amplifi - er designed to be used in cars with a built- in (OEM) car radio. A complete adapter...

  • Page 4: Installation

    The i-soamp-4 can by itself heat up consi- derably (up to 80°C), therefore care must be taken to ensure distance to other heat...
  • Page 5 2. ISO power adapter (black) on the car‘s cable harness (see 1.5 as well) 3. i-soamp-4 with systemt plug connected 4. ISO loudspeaker plug (brown) on the OEM radio 5. ISO power plug (black) on the OEM...
  • Page 6 1. ISO loudspeaker plug on the radio 2. ISO loudspeaker adapter on the car‘s cable harness 3. 4-pin plug on the radio with factory settings 4. 4-pin plug on radio with factory settings 5. Connection plug on the i-soamp-4...
  • Page 7 3. 4-pole plug (not used) 4. 4-pole plug „Connection for optional subwoofer“ 5. 5. Connection plug on the i-soamp-4 6. The two plugs removed from adapter No. 3 and plug No. 4 are joined and connec- ted the radio to the rear loudspeakers...
  • Page 8 The position for the i-soamp-2 selector cables directly to the switch and the loudspeaker connection battery. plan can be seen in the operating instruc- tions for the 2-channel amplifi er. Please use exclusively i-sotec subwoofers! Other subwoofers may cause damage to your i-soamp-4!
  • Page 9 In that case the i-soamp-4 has to be connected directly to the battery. 1.6 Notes on direct connection to the battery: 1.
  • Page 10 A main fuse MUST be inser ted into the Connect the other end of this cable to plus cable at a maximum distance of 12“ the black (-) clamp on the i-soamp-4 cable (=30 cm) from the battery‘s plus terminal harness. The plug contacts needed for this (insurance regulations!) that is triggered in comes as accessories.

  • Page 11: Initial Operation

    Warning: 2. INITIAL OPERATION 1.) The fuse on the i-soamp-4 may only be 2.1 Turn the radio on at low volume replaced with the same capacity (20 A) 2.2 After checking the functioning of the in order to prevent damage to the various loudspeakers, turn the volume appliance.

  • Page 12: Controls And Connections

    3. CONTROLS and CONNECTIONS 4. TECHNICAL DATA Operating voltage: 10,4 -14.4V DC Power capacity: Max. 15A Music output: 4 x 65 W @ 4 Ohm or t. 2 x 65 W+1x100 W @ 4 Ohm Loudspeaker impedance: Min. 4 Ohm THD+N: <0,01% SNR: >96dB Max environmental temperature: 45°C...

  • Page 13: Liability Disclaimer

    LIABILITY DISCLAIMER 4. Distorted tone i-sotec does not assume any liability for • Check the loudspeakers and their damages that could be caused by improper feeds for short-circuiting. use of the appliance, improper installation • Are the loudspeakers OK ? or incorrect connection as well as non-ob- •...
  • Page 14 I-Sotec i-soamp 4 Описание...

Table of Contents