Radyne RCS20 Installation And Operation Manual page 91

RCS20 M:N Redundancy Switch
Channels
Nonvolatile bytes
per Backup
<1> Channel
Backup 1
(Channel 0)
<1> Configuration
Backup 1
(Channel 0)
<1> Backup Mode
Backup 1
(Channel 0)
<1> Force Manual
Backup 1
(Channel 0)
<1> Force Manual
Backup 2
(Channel 9)
<1> Configuration
Backup 2
(Channel 9)
<1> Backup Mode
Backup 2
(Channel 0)
<1> Force Manual
Backup 2
(Channel 0)
<1> Force Manual
Reserved
<4> Reserved
<4>
<1> Control Mode
<1> Software
Revision
<1> Number of
Channels
TM056 – Rev. 2.3
4 for RCS20
0 = Backup modem
0 = Manual
1 = Automatic non-revertive
2 = Automatic revertive
Channel number for manual backup (1 to 9)
Modulator Backup (ignored if in automatic mode)
Channel number for manual backup (1 to 9)
Demodulator Backup (ignored if in automatic mode)
0 = Backup modem
1 = Preemptable prime modem
2 = Prime Modem
0 = Manual
1 = Automatic non-revertive
2 = Automatic revertive
Channel number for manual backup (1 to 8)
Modulator Backup (ignored if in automatic mode or if channel 9
is configured as prime)
Channel number for manual backup (1 to 8)
Demodulator Backup (ignored if in automatic mode or if channel
9 is configured as prime)
Reserved for RCS10 (= 0 for RCS20)
Reserved for RCS10 (= 0 for RCS20)
Status Bytes
0 = Front Panel
1 = Terminal
2 = Remote Port (Computer RLLP)
Binary number, decimal point implied
Maximum number of prime and backup channels available to
the RCS20 switch. (10 decimal for RCS20).
Appendix A
A-5