Table of Contents
Advertisement
RCS20 M:N Redundancy Switch
User Interfaces
4.7.9 RCS20 Channel Definitions
The RCS20 organized the modems connected to the switch according to satellite communications
channels. These channels are labeled on the DDS20 and IFS20 panels, and are defined as follows:
Channel 0 - Backup 1
Channel 1 - Modem 1
Channel 2 - Modem 2
Channel 3 - Modem 3
Channel 4 - Modem 4
Channel 5 - Modem 5
Channel 6 - Modem 6
Channel 7 - Modem 7
Channel 8 - Modem 8
Channel 9 - Modem 9/Backup 2
4.7.10 Detailed Command Descriptions
Refer to Appendix A
4.8 Ethernet Port User Interface
The Ethernet Port of the DM240 allows for complete control and monitoring of all DM240 parameters
and functions via a 10BaseT or 100BaseT Ethernet Connection.
4.9 RCS20 Management Information Base (MIB)
All of the necessary information for the user interface is contained in the DM240 Management
Information Base (MIB), which is contained in Appendix B.
4.10 Terminal Port User Interface
The Terminal Port of the DM240 allows for complete control and monitoring of all DM240 parameters
and functions via an RS-232 Serial Interface.
TM056 - Rev. 2.3
4-19
Advertisement
Table of Contents
