Woods SB54S Operator's Manual page 7

installed securely to ensure equipment is in a safe
condition before putting unit into service.
 Make sure all safety decals are installed.
Replace if damaged. (See Safety Decals section for
location.)
 Make sure shields and guards are properly
installed and in good condition. Replace if damaged.
 Do not disconnect hydraulic lines until engine is
stopped, power unit is properly secured, equip-
ment and all components are lowered to the
Snowblower_SRs (2/14/2012)
ground, and system pressure is released by oper-
ating all valve control levers.
 Use a suitable lifting device of sufficient capac-
ity. Use adequate personnel to handle heavy com-
ponents.
STORAGE
 Block equipment securely for storage.
 Keep children and bystanders away from stor-
age area.
Safety 7