Woods SB54S Operator's Manual page 25

MOUNTING ELECTRIC CHUTE DEFLEC-
TOR (FIGURE 26)
1. Install remote deflection option by fastening actua-
tor (14) using cap screws (15) and nuts (16). Do
not over tighten hardware.
MAN0869 (04/13/2011)
5. Cable Tie
14. Actuator
15. 1/4 NC x 1-1/2 HHCS
16. 1/4 NC Lock Nut
Figure 26. Electric Chute Deflector Installation
2. Attach control box in tractor operator area. Attach
end to a power source and ground on the tractor,
(see tractors operator's manual).
Assembly 25