Using The Remote Jack - Sangean DAR-101 User Manual

Using the REMOTE jack

GB
This unit has a REMOTE jack to which you can connect radios providing special Remote Switch
connection. This function allows you to record radio stations preset in your radio. The remote
switch works with the Sangean ATS909, CCRadio plus, and Radio Shack DX398 (all above not
supplied).
2pcs of 3.5Φmm wire (not supplied) are required for connection. Connect Remote jack on
DAR-101 to the Remote jack of your required recording input (e.g. ATS-909X), then use the sec-
ond wire to connect the Line in jack of DAR-0 to the Line out jack of your recording input.
Please refer to the radio or device's manual for proper operation of this feature.
34