Recording Monitor - Sangean DAR-101 User Manual

Recording monitor

You might get slight latency or a hollow echo while recording a telephone call or from an external
audio device, this is due to interference of the built-in speaker. To reduce this obstruct, this func-
tion allows you to disable the built-in speaker while recording.
. Make sure the unit is in Telephone recording mode or you are recording from an external audio
device (LINE IN), as recording from built-in microphone or from external microphones will mute
the speaker automatically.
. Press the Menu button to enter the main menu.
3. Rotate the Tuning control until 'RECORD SETUP' is highlighted and press the enter button to
enter the setting.
4. Rotate the Tuning control till 'Rec Monitor' is highlighted and press the Enter button to enter
the setting.
5. Rotate the Tuning control to select 'on' to allow the speaker output sound during recording.
Choose 'off' to disable speaker output during recording and a speaker icon with a cross (
shows on display.
Note:
While in Telephone recording mode or you are recording from an external audio device (LINE
IN), press the Playmode button to mute or unmute the speaker.
3
)