Panasonic WH-MDC06E3E5 Service Manual page 37

11.4.3.3 Connecting The Remote
Control Cable To Mono Bloc
Unit
Be sure to turn off the main power before installing and connecting
the remote control. Otherwise, it will cause the electrical shock.
1 Remove the cabinet front plate.
2 Connect the remote control cable with the
provided connector as shown in below
illustration. (Refer wiring diagram for detail.)
3 Guide the remote control cable through the
clamper, bushing and Cable cover
(Refer illustration "How to connect Remote
Control to Provided Connector" for detail.)
4 Reinstall the cabinet front plate after
connection complete.
CAUTION
.
11.4.3.4 Disposal of Mono Bloc Unit
Drain Water
When a Drain elbow
follow below:
The unit should be placed on a stand which is
o
taller than 50mm.
Cover the 8 holes (ø20mm) with Rubber cap
o
(refer to illustration below)
Use a tray (field supply) when necessary to
o
dispose the Mono bloc unit drain water.
If the unit is used in an area where temperature
falls below 0°C for 2 or 3 consecutive days, it is
recommended not to use the Drain elbow
Rubber cap , for the drain water freezes and the
fan will not rotate.
37
is used, please ensure to
and