Pace Arrow - Halfords Bicycle Computer Owner's Manual

RPM Current Cadence
1. RPM (Revolutions Per Minute) is a measure of rotational speed.
It's updated every second.
2. The current RPM (cadence) is always shown on the middle display.
3. For Bike 1, if you do not turn the crank for over 4 seconds, the
current RPM will be reset to zero.
For Bike 2, if you do not turn the crank for over 2 seconds, the
current RPM will be reset to zero.

MAX. RPM
1. With this function, the computer will record your maximum
cadence during riding.
2. Whenever you reset the computer or change the battery, the
max. RPM record for a trip will be cleared.
*AVG RPM Average Cadence
1. With this function, the computer will display the average
cadence during riding. It's updated per second.
2. Whenever you reset the computer or change the battery, the
average cadence record will be cleared.
 

Pace Arrow

1. The pace arrow shows the comparison between the current
speed and average speed.
2. If the current speed is above or equal to the average speed, the
upward arrow ( ) will flash on the display.
3. On the contrary, if the current speed is below the average speed,
the downward arrow ( ) will flicker.

ALT Accumulated Altitude Gains
1. With this function, it displays the accumulated altitude gains
during a trip.
2. When you ride over uphill paths, the altimeter will accumulate
the altitude gains. However, when you ride over downhill paths,
the computer will not deduct the altitude loss. The altimeter
always accumulates your altitude gains only.
Maximum Cadence
23
(During a Trip)